| Customization: | Available |
|---|---|
| Type: | Vacuum Blood Tube & Blood Bag |
| Material: | Plastic |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Red Cap serum plain tube
Blood collection tubes do not contain additives, anticoagulant or procoagulant components, only vacuum. It is used for routine serum biochemistry, blood bank and serology related tests, various biochemical and immunological tests, such as syphilis, hepatitis B quantification, etc. It does not need to shake after blood drawing. The type of specimen preparation is serum. After blood is drawn, it is placed in a 37 ºC water bath for at least 30 minutes, centrifuged, and the upper layer of serum is reserved.
2. Clot Activator
There is a coagulant in the blood collection tube that accelerates the coagulation process. The rapid serum tube can coagulate the collected blood within 5 minutes and is suitable for emergency serum series tests. It is the most commonly used coagulation promoting test tube for daily biochemistry, immunology, serum, hormones, etc. After drawing blood, it can be inverted and mixed 5-8 times. When the room temperature is low, it can be placed in a 37 ºC water bath for 10-20 minutes, and the upper layer of serum can be centrifuged for later use.
3. Gel&Activator Tube Yellow tube
Inert separation gel and coagulant are added to the blood collection tube. The specimen remains stable within 48 hours after centrifugation. Coagulants can quickly activate the coagulation mechanism and accelerate the coagulation process. The type of specimen prepared is serum, suitable for emergency serum biochemical and pharmacokinetic tests. After collection, invert and mix 5-8 times, stand upright for 20-30 minutes, centrifuge the supernatant for later use.
4. EDTA K2 K3 Purple Tube
Ethylenediaminetetraacetic acid (EDTA, molecular weight 292) and its salts are amino polycarboxylates suitable for general hematological testing and are the preferred test tubes for blood routine, glycated hemoglobin, and blood type testing. Not suitable for coagulation tests and platelet function tests, nor for the determination of calcium ions, potassium ions, sodium ions, iron ions, alkaline phosphatase, creatine kinase, and leucine aminopeptidase. Suitable for PCR testing. Spray 100ml of 2.7% EDTA-K2 solution onto the inner wall of a vacuum tube, blow dry at 45 ºC, collect blood to 2mI, immediately invert and mix 5-8 times after blood collection, and mix well for later use. The sample type is whole blood, and it needs to be mixed thoroughly before use.5. Black sodium citrate ESR tube
The required concentration of sodium citrate for erythrocyte sedimentation rate test is 3.2% (equivalent to 0.109mol/L), and the ratio of anticoagulant to blood is 1:4. Containing 0.4mL of 3.8% sodium citrate, draw blood to 2.0mL. This is a specialized test tube for erythrocyte sedimentation rate, with a sample type of plasma, suitable for erythrocyte sedimentation rate. Immediately invert and mix 5-8 times after drawing blood. Shake well before use. The difference between it and the test tube used for coagulation factor testing is that there is a difference in the ratio of anticoagulant concentration to blood, which cannot be confused.
6. Sodium citrate coagulation test tube light blue PT tube
Sodium citrate mainly exerts anticoagulant effects by chelating with calcium ions in blood samples. The recommended concentration of anticoagulant by the National Clinical Laboratory Standardization Committee is 3.2% or 3.8% (equivalent to 0.109mol/L or 0.129mol/L), and the ratio of anticoagulant to blood is 1:9. The vacuum blood collection tube contains approximately 0.2mL of 3.2% sodium citrate anticoagulant. Blood is collected to 2.0mL, and the specimen type is whole blood or plasma. After collection, it is immediately inverted and mixed 5-8 times. After centrifugation, the upper layer of plasma is taken for later use. It is suitable for coagulation experiments, PT, APTT, and coagulation factor tests.
7. Heparin Sodium Green Tube
Heparin is added to the blood collection tube. Heparin has a direct anticoagulant effect, which can prolong the clotting time of specimens. Used for emergency and most biochemical experiments, such as liver function, kidney function, blood lipids, blood glucose, etc. Suitable for red blood cell fragility test, blood gas analysis, hematocrit test, erythrocyte sedimentation rate and general biochemical measurement, not suitable for blood coagulation test. Excessive heparin can cause white blood cell aggregation and cannot be used for white blood cell counting. Because it can make the background of blood slides appear light blue after staining, it is also not suitable for white blood cell classification. Can be used for blood rheology, sample type is plasma, immediately invert and mix 5-8 times after blood collection, and take the upper layer of plasma for later use.
8. Glucose Grey Tube
Sodium fluoride is a weak acting anticoagulant commonly used in combination with potassium oxalate or sodium iodate in a ratio of 1 part sodium fluoride to 3 parts potassium oxalate. This mixture of 4mg can prevent 1ml of blood from clotting and inhibit sugar decomposition within 23 days. It cannot be used for urease assay to determine urea, nor for alkaline phosphatase and amylase assay. It is recommended for blood glucose detection. It contains sodium fluoride or potassium oxalate or disodium ethylenediaminetetraacetic acid (EDTA Na) spray, which can inhibit the activity of enolase in glucose metabolism. After blood drawing, it is reversed and mixed 5-8 times. After centrifugation, the supernatant plasma is taken for standby. It is a special tube for rapid blood glucose determination.
| Product name | Vacuum blood collection tube |
| Material | PET/Glass |
| Usage | For Determination, blood type verification,bloodcross-matchtest |
| Sterile | EO Gas |
){kind=link}