Spray Mist Leaf Humidifier Car USB Cool Mist Air Humidifier

• Customization: Available
• Cold Hot Dressing Application: Psoatic Strain
• Usage Mode: For Oral Administration
• Model NO.: 1pcs/bag
• Nature: No
• Customized: Non-Customized
• Type: Oxygen Detector
• Group: Female
• Certification: CE, FDA
• Transport Package: 1PCS/Bag
• Specification: 1pcs/bag
• Trademark: hiprove
• Origin: China
• HS Code: 3926909090
• Production Capacity: 600000

Product Description

Input voltage: DC5V
 
Power consumption: 2W
 
Water bottle capacity: 130ML
 
Packing quantity: 36PCS
 
Product size: 9.7 * 9.7 * 9.7cm
 
Product packaging: 12 * 12 * 16 cm
 
Outer box size: 50 * 38 * 49.5cm
 
Single net weight/gross weight: 202g/256g
 
Net weight/gross weight of the whole box: 9.5kg/12kg

Aromatherapy humidifier parameters:

Body size	95 x 100mm
Water tank capacity	130ml
Operating duration	4 hours
Net weight	130g

Timing shutdown: automatic power-off protection without water
Aromatherapy function: add water to the water tank (not exceeding the water level), add appropriate amount of essential oil, short press the atomization switch button to turn on the aromatherapy atomization; short press again to stop the atomization work.
Light function: short press the light switch button to turn on the flame atmosphere light; long press again, the brightness of the flame atmosphere light increases by 30%; short press again; turn off the flame atmosphere light.
Protection function: built-in water shortage protection chip, automatically stop working after detecting that there is no water;
Custom Process                                                                                                                

If the customer has no drawings, but has samples, you need to send the samples to our engineer, then we will make the drawings. Then we make the mold according to the drawing.

Occasionally, a customer will make a smaller, lower cost sample mold just to make a sample. Sometimes, customers directly make a large mold for making samples and mass production.

Molds are usually made of steel. We promise that the mold can be used 500,000 times within 5 years. If there is any problem during the warranty period, our company will bear the cost of maintenance or remanufacturing.

After the mold is made, we will test the mold, if the mold is good. Then trial production, our engineers will test and burn-in etc. to ensure the quality of the mold. Then we send the final prototype to our customer for testing.

After the sample is confirmed, we will start mass production. The production process is as follows:
Purchase raw materials → packaging material design → circuit board purchase → material inventory → production → aging test → QC spot check → inspection report