| Model |
LPG-5L |
PG-10L |
PG-15L |
PG-25L PG-50 |
| Inlet temperature(ºC) |
120-350 Self-contro |
| Outlet temperature(ºC) |
80-90 |
| The spray form |
High speed centrifugal atomizer(mechanical drive or stepless frequency controlavailable) |
| Water evaporation(kg/h) |
5 |
10 15 |
25 50 |
|
| Collection method of products |
,First and second level cyclone collectors |
One+two |
| cyclone collection + three dehumidifier |
| Atomizer speed |
25000 |
22000 |
18000 |
| (rpm) Atomizing disc diameter |
60 |
120 |
| (kw)Maximum power of electric heating |
12 |
24 |
36 |
36 |
65 |
| The heat source |
Electricity |
Electricity +steam |
| Dry powder recovery rate(%) |
≥95 |
| floor space |
Long M |
1.8 |
2.2 |
2.8 |
3.2 |
4 |
| Covers an area |
Wide M |
1 |
1.2 |
1.8 |
2.8 |
3.5 |
| of the size |
HighM |
2.2 |
2.8 |
3.5 |
4.5 |
5.5 |
| :Note: The specific evaporation capacity is determined according to the actualmaterial characteristics and drying temperature |
Specifically used in the following fields: beverage flavors and pigments, milk and egg products, plant and vegetable extracts, pharmaceutical synthesis, thermosensitive substances, plastic polymers and resin aromatics, blood products, ceramics and superconductors, biochemical products, dyes, soaps, and detergents, food adhesives, oxide bone powder, and tooth powder, etc.
Main features of small spray dryer:
Original imported nozzle with high efficiency.
Colorful large touch screen operation, combined with fully automatic and manual control, with Chinese and English panels and parameter LCD display.
Real time PID constant temperature control technology, accurate temperature control, heating temperature control accuracy ± 1 ºC.
The spray, drying and collecting device is made of transparent, high-quality, high-temperature resistant high borosilicate glass, and the whole process of spray drying experiment is visible.
The atomization structure of two fluid spray is made of high-precision 316 stainless steel, and the particle size of the powder is normally distributed, with good fluidity.
The jet device automatically unblocks (passes the needle) and the frequency is adjustable. When the nozzle is blocked, it will automatically clear to ensure the continuity of the experiment.
The feeding amount can be adjusted through the feeding peristaltic pump.
Unique protection function, the fan does not start and the heater cannot start.
Equipped with an imported oil-free air compressor, with a noise level of less than 50db.
Equipped with air inlet filters to ensure sample purity.
After drying, the product has a uniform particle size, with over 95% of the dry powder at the same particle size.
Technical parameters of small spray dryer:
1. Inlet air temperature control: 30-300 ºC
2. Air outlet temperature control: 30-150 ºC
3. Evaporation water volume: 1500mL/H~2000ml/h
4. Maximum feed rate: 2000mL/H
5. Minimum feed volume: 50mL
6. Feeding method: peristaltic pump adjustment
7. Average drying time: 1.0~1.5S
8. Electric heater power: 3KW AC220V single-phase grounding
9. Fan: 0.2KW, maximum air volume 5.6m3/min, maximum air pressure 1020Pa
10. Air compressor: 0.2KW, maximum gas production 4.2 m3/h
11. Working pressure of compressed air: 2-3Bar
12. Equipment dimensions: 1200mm (height) × 780mm long × 580mm wide
13. Nozzle diameter: 1.00mm
14. Equipment weight: 125KG
Configuration of small spray dryer
1. Atomizer; 2. Large clamp; 3. Exhaust pipe; 4. Locking nut; 5. Cyclone separator; 6. 1st clamp; 7. Collect bottles; 8. Large clamp 9, peristaltic pump; 10. Drying room; 11. Touch screen; 12. 2nd clamp; 13. Power switch; 14. Feed pipe; 15. 3rd clamp; 16. Collection tu
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}